How To Build A Pvc Recurve Bow Plans Kit

🔥+ How To Build A Pvc Recurve Bow Plans Kit 05 Jul 2020 You can buy the units completed (finished or unfinished) or buy the plans and build your own. Chuck Boxes Grubby One It takes less than a ...

How To Build A Pvc Recurve Bow Plans Kit You can choose from simple 6x10 lean to shed plans or the gable end 6x10 storage shed. Each shed design comes with a materials list to get your project ...

Log Couch Plans Review

2×4 bench plans, plans include a free PDF download, step-by-step instructions, material list with cutting list and shopping list.

2×4 Bench Plans – Overview

 

2×4 Bench Plans – Material List

How To Build A Pvc Recurve Bow Plans Kithow to How To Build A Pvc Recurve Bow Plans Kit for Shopping List

Shopping List

8 – 2×4 – 8′

2 3/4″ deck screws

Cutting List

Cutting List

A – A – 4 – 2×4 – 2′ 3/16″ (15-degree angle cut on both ends in same direction)

B – 2 – 2×4 – 1′ 6 the 1 last update 2020/07/05 1/2″ (ripped to 1 1/2″ – 15-degree angle cut on one end)B – 2 – 2×4 – 1′ 6 1/2″ (ripped to 1 1/2″ – 15-degree angle cut on one end)

C – C – 2 – 2×4 – 1′ 7 1/16″ (15-degree angle cut on both end in same direction)

D – 2 -2×4 – 1′ 8 1/8″

E – 2 – 2×4 – 1′ 11 1/8″ (15-degree angle cut on one end)

F – 1 – 2×4 – 3′ 9″ (15-degree bevel cut)

for 1 last update 2020/07/05 G – 1 – 2×4 – 3′ 9″G – 1 – 2×4 – 3′ 9″

H – 4 – 2×4 – 4′

I – 3 – 2×4 – 4′

the 1 last update 2020/07/05 J – 1 – 2×4 – 3′ 9″J – 1 – 2×4 – 3′ 9″

 

How To Build A Pvc Recurve Bow Plans Kithow to How To Build A Pvc Recurve Bow Plans Kit for

Cut four 2×4’s as shown in illustration above (A).

the 1 last update 2020/07/05   

Cut two 2×4’s to 1′ 6 1/2″ long, rip the 2×4 to 1 1/2″, cut a 15-degree angle cut on one end (B).

How To Build A Pvc Recurve Bow Plans Kithow to How To Build A Pvc Recurve Bow Plans Kit for Cut two 2×4’s to 1′ 7 1/16″ long, cut 15-degree angle cut on both end in the same direction (C).

Drill pilot holes and install as shown in illustration above using 2 3/4″ deck screws.

 

Cut two 2×4’s to 1′ 8 1/8″ long (D).

Drill pilot holes and install as shown in illustration above using 2 3/4″ deck screws.

 

How To Build A Pvc Recurve Bow Plans Kithow to How To Build A Pvc Recurve Bow Plans Kit for

Cut two 2×4’s to 1′ 11 1/8″ long, cut a 15-degree angle cut on one end (E).

Drill pilot holes and install as shown in illustration above using 2 3/4″ deck screws.

 

Cut a 2×4 to 3′ 9″ long, cut a 15-degree bevel cut along the edge (F).

How To Build A Pvc Recurve Bow Plans Kithow to How To Build A Pvc Recurve Bow Plans Kit for Drill pilot holes and install as shown in illustration above using 2 3/4″ deck screws.

 

Cut a 2×4 to 3′ 9″ long (G).

How To Build A Pvc Recurve Bow Plans Kithow to How To Build A Pvc Recurve Bow Plans Kit for Drill pilot holes and install as shown in illustration above using 2 3/4″ deck screws.

 

Cut four 2×4’s to 4′ long (H). Cut three 2×4’s to 4′ long (I). Cut one 2×4 to 3′ 9″ long (J).

Drill pilot holes and install as shown in illustration above using 2 3/4″ deck screws.

Like these 2×4 bench plans? Let me know, leave me a comment below. Share this link with your friends and your social media, thanks.
Construct101 offers free online version plans. These free plans also have a free print friendly PDF downloadable version free of ads. Click here to download.

Related Articles

25 comments

  1. How To Build A Pvc Recurve Bow Plans Kithow to How To Build A Pvc Recurve Bow Plans Kit for It won’t let me download the plans. This is really the sillist way to get downloads free I’ve seen yet. I only works now and then.
    thank you for all you have supplied
    Ed

  2. How To Build A Pvc Recurve Bow Plans Kithow to How To Build A Pvc Recurve Bow Plans Kit for Looks fairly basic & easy to build. Will have to try it out & see…After my back gets healed up. Am going to use redwood though since it will be outside here in AZ. Thanks for such a simple DIY plan.

    Kent C.

  3. Looks like great and simple plans to fallow nice job. I’m gonna have to try this project with my students.

  4. Will not let me download the file

  5. Allan Burgesse

    How To Build A Pvc Recurve Bow Plans Kithow to How To Build A Pvc Recurve Bow Plans Kit for I built the 2×4 Bench as per plans I downloaded free. After spending $50 on wood & screws, I completed the bench in 4 1/2 hours. AWESOME!

  6. Allan Burgesse

    I built the 2×4 Bench in 4 1/2 hrs.
    AWESOME

  7. Great plans, I am going to enjoy building this!

  8. Awesome bench plans, can’t wait till my husband makes this for me. Thank you so much.

  9. I built this for about $50 and it was a good project. My wife however said the sears were too shallow and the legs to short. Her knees were 4 inches out from the front of the seat and stuck up above the seat level. She is 5 ft 7 inches tall. So the alterations are under way. I enjoyed this build the instructions were excellent.

    • correction to above ,the seats were not wide enough so I added 1 more board and the legs were a little short soI added 2 inches..

  10. Suzanne Scholtens

    Still waiting for for 1 last update 2020/07/05 the pdf I donated 5.00 for. Need before 1/20/19Still waiting for the pdf I donated 5.00 for. Need before 1/20/19

    • I have already responded to the 1 last update 2020/07/05 both of your emails, check your spam folder.I have already responded to both of your emails, check your spam folder.

    • James B Garner

      How To Build A Pvc Recurve Bow Plans Kithow to How To Build A Pvc Recurve Bow Plans Kit for Your plans are. easy to read easy-to-use and handy

  11. Sorry to bother but I don’t see where the screws should be placed for affixing pieces B, E, and F, I am building these for my Eagle scout service Project and I need to know where they are placed before Saturday January 12th, could you send the measurements for their placement or a picture of where they are placed approximately, Thank you.

  12. We are having trouble finding 2 3/4” screws. Would you recommend 2 1/2” or 3”?

  13. I built this in about 2 days. It looks good and works well.
    Thanks

  14. The measurements in the material list do not match the measurements in the diagrams. Also, who uses feet in Measurements? 1ft 11 inches should be marked as 23 inches ect. As it stands, the measurements bony match and not knowing which one to use along with strange sketch up diagrams ,I’ll find another set of plans.

  15. Built two of these today. Took 3 1/2 hours total. Very sturdy. Thanks.

    • Was hoping to build this with scrap 2×4 lumber during my quarantine. I modified the plans to create a 28” wide lounge chair instead of the 4’ wide bench. Unfortunately, I the 1 last update 2020/07/05 am still short about 4 boards and need to find screws. Having trouble finding 2-3/4” screws. Would 2-1/2” wood screws work? Thanks for your plans!Was hoping to build this with scrap 2×4 lumber during my quarantine. I modified the plans to create a 28” wide lounge chair instead of the 4’ wide bench. Unfortunately, I am still short about 4 boards and need to find screws. Having trouble finding 2-3/4” screws. Would 2-1/2” wood screws work? Thanks for your plans!

  16. Is there any step by step instruction for this bench? I can’t not find any. All I see is pics and cutting instructions.

  17. Cut list for A does not match the first step cut lengths – they are about a foot diff.

  18. how far apart are the slats

  19. Was hoping to build this with scrap 2×4 lumber during my quarantine. I modified the the 1 last update 2020/07/05 plans to create a 28” wide lounge chair instead of the 4’ wide bench. Unfortunately, I am still short about 4 boards and need to find screws. Having trouble finding 2-3/4” screws. Would 2-1/2” wood screws work? Thanks for your plans!Was hoping to build this with scrap 2×4 lumber during my quarantine. I modified the plans to create a 28” wide lounge chair instead of the 4’ wide bench. Unfortunately, I am still short about 4 boards and need to find screws. Having trouble finding 2-3/4” screws. Would 2-1/2” wood screws work? Thanks for your plans!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Copyright 2020 www.Construct101.com